ISMC (Indian Standard Medium Channel) Weight chart.
ISMC (Indian Standard Medium Channel) Weight chart
Angle/Channel/Beam sections Indian Standards
ISMB: Indian Standard Medium Weight Beam
ISMC – Indian Standard Medium Weight Channel
ISJB: Indian Standard Junior Beams
ISLB: Indian Standard Light Weight Beams
ISWB: Indian Standard Wide Flange Beams
In Australia, Universal Beams (UB) and Columns are well-known brand names (UC).
Ms Channel Weight in Kg
|Indian Standard||Sizes||Weight in Kg Per Foot||Weight in Kg per Meter|
|ISMC/ ISMB/ ISA||75 * 40 * 4.8||2.176||7.14|
|ISMC/ ISMB/ ISA||100 * 50 * 5||2.914||9.56|
|ISMC/ ISMB/ ISA||125 * 65 * 5.3||3.993||13.10|
|ISMC/ ISMB/ ISA||150 * 75 * 5.7||5.121||16.80|
|ISMC/ ISMB/ ISA||175 * 75 * 6||5.975||19.60|
|ISMC/ ISMB/ ISA||200 * 75 * 6.2||6.798||22.30|
|ISMC/ ISMB/ ISA||250 * 82 * 9||10.426||34.2|
|ISMC/ ISMB/ ISA||300 * 90 * 7.8||11.067||36.3|
|ISMC/ ISMB/ ISA||400 * 100 * 8.8||15.274||50.1|
JINDAL make Weight Channel Chart
|Depth (mm) * Flange (mm) * Sectional Weight (kg/m)|
|ISMC 250 * 80 * 30.6||ISMC 300 * 90 * 36.3|
|ISMC 250 * 82 * 34.2||ISMC 300 * 92 * 41.5|
|ISMC 250 * 83 * 38.1||ISMC 300 * 93 * 46.2|
|ISMC 250 * 83 * 38.1||ISMC 400 * 100 * 50.1|
SAIL (Steel Authority of India Limited)
Structural steel section sizes and weight of beams/joists, channels, and angles
|Channel||Bhilai Steel Plant|
|75 * 40 * 4.8||7.14||10 to 12|
|100 * 50 * 5||9.56|
|125 * 65 * 5.3||13.1||10 to 11.5|
|125 * 66 * 6||13.7||for all dimensions|
|150 * 75 * 5.7||16.8|
|150 * 76 * 6.5||17.7|
|175 * 75 * 6||19.6|
|200 * 75 * 6.2||22.3|
|200 * 76 * 7.5||24.3|
|250 * 82 * 9||34.2||10 to 12|
|300 * 90 * 7.8||36.3||for all dimensions|
|400 * 100 * 8.8||50.1|
VIZAG (RINL: – RASHTRIYA ISPAT NIGAM LIMITED )
Steel Channel Weight Per Kg
|Side(mm) * Side(mm) * Thickness range (mm)||Section Weight (Kg/m)|
|MC *40 * 32 * 5||4.82|
|MC 75 * 40 * 4.8||7.14|
|MC 100 * 50 * 5||9.56|
|MC 125 * 65 * 5.3||13.1|
|MC 150 * 75 * 5.7||16.8|
|Steel Channel||IS :808 – 1989 / IS :3954 – 1981|
|Tolerance as per:-|
|Steel Channel||IS :1852 – 1985 / IS :3954 – 1981|
|Grades as per:-|
|Steel Channel||IS :2062 :E250 A – 2006|
ISMC Weight Chart Per Meter and Kg
|Type||Weight per meter (kg)||Depth of Section(mm)||Sectional area(cm²)||Thickness of Flange(mm)||Width of Flange(mm)||Thickness of web(mm)|
Structural Steel Channel Weight Calculator
|Grade of Raw Material||Select Aluminium Brass IS 319 Carbon Steel Cast Iron Copper EN-19 EN-1A EN-24 EN-8D EPDM Rubber Fe 11 Fe 12 Fe 24 Hestalloy C-276 Inconel 600 Inconel 610 Inconel 625 Mild Steel Natural Rubber SBR Rubber Silver SS 201 SS 300 Series SS 303 SS 304 SS 304L SS 308 SS 309 SS 309L SS 310 SS 316 SS 316L SS 321 SS 400 Series SS 410 SS 416 SS 446 ST-37 ST-52 Steel A105 Steel A106 Gr.B Titanium||Please Select an Metal Type.|
|Type of Raw Material||Select Round Square Rectangle Hexagonal Octagonal Sheet Pipe Round Pipe Square Pipe Rectangular Angle Chanel Tee Beam|
|Input Size of Raw Material|
|Width MM Inches Feet Yard CM MTR Height MM Inches Feet Yard CM MTR Wall Thickness MM Inches Feet Yard CM MTR Length MM Inches Feet Yard CM MTR|
How to calculate the weight of the mild steel channel?
Channels made of mild steel are U-shaped steel constructions, and their dimensions and wall thickness are typically employed to define them. The bottom flange and the top web are the two components that make up a channel manufactured out of mild steel. The component that is horizontal at the bottom is called the flange, and the part that is vertical at the top is called the web.
It does not have sides of equal length all the way around. For instance, a channel made of mild steel has a thickness of 5 millimeters with sides that are 100 millimeters broad and 50 millimeters wide respectively.
MS channel size
A flange and a web are the two components that make up an MS channel, as is well known. It is also available in a variety of sizes, ranging from 75404.8 mm all the way up to 4001008.8 mm.
The weight of an MS channel can be expressed in either kilo per meter or kilograms per foot. It seems to reason that dimensions with a higher value will also have a greater value for their associated weight, and dimensions with a lower value will have a lower value for their associated weight.
The dimensions of an MS channel, for instance, are 100 millimeters long by 50 millimeters wide and 5 millimeters deep.
Mild Steel Channel Unit Weight
The weight of an MS channel can be calculated using the formula weight = volume density. This yields the unit weight of an MS channel. The density of steel is measured in kilograms per cubic meter, and its volume can be calculated by multiplying the height of the web by the width of the flanges by the thickness.
Mild Steel Channel Weight in kg per Meter
MS Web Volume
MS Channel Size = 100×50×5 mm
Web Depth = 100 mm =0.1m
Web Thickness = 5 mm=0.005 m
Web Length = 1 m
Volume = l×b×h
Volume = 0.1×0.005×1 m3
Web Volume = 0.0005 m3
Two flange Volume
MS Channel Size = 100×50×5 mm
Flange Width = 50_5 mm =45mm=0.045 m
Flange Thickness = 5 mm=0.005 m
Flange Length = 1 m
Volume = l×b×h
Volume = 0.045×0.005×1 m3
Flange Volume = 0.000225 m3
Two Flange Volume = 0.000225×2 m3
Two Flange Volume of = 0.000450 m3
MS channel Total volume
Total volume = volume of flange+ volume of web
Total volume = 0.000450 +0.0005 m3
Total volume =0.000950m3
4) Weight of MS channel
Weight = volume× density
Volume = 0.000950 m3
Density of steel = 7850 kg/m3
Weight = 0.000950m3×7850 kg/m3
Weight of MS channel = 7.45 kg/m
Ans: MS channel unit weight will be 7.45 kg
Read More :
All About Schedule 40 Steel Pipe: Schedule 40 Steel Pipe is the most prevalent pipe schedule, It’s widely used in water and gas lines, and it can be galvanized but isn’t essential. It might also appear when there is a need for adornment or support.
Growing crude steel production in India and Southeast Asia would worsen the emission profile : According to an industry research released, crude steel production expands through the Blast Furnance (BF) and Basic Oxygen Furnance (BOF) methods, India and Southeast Asia will worsen their emission profile
The ISMC (Indian Standard Medium Channel) Weight Chart is an essential reference guide for all engineers involved in the erection of structural steel designs. ISMC weight charts provide valuable information on the weight of various steel sections used in structural applications. This chart is based on the Indian Standard Medium Channel (ISMC) standard adopted by the Indian Standard Institute and is applicable to various product categories, including steel bars, plates and sections.
The ISMC weight chart helps in determining the weight of several steel sections in a single scope. The chart is based on the combined weights of a particular element and its associated sections, such as the web, flanges and other components. This chart can be used for a variety of different sizes of steel sections, which include Hot-Rolled sections, Cold-Formed sections and Galvanized sections.
ISMC weight charts also provide the necessary information to calculate the exact weight of a particular section, which includes the weight of the plate and other components. The ISMC weight chart uses an appropriate statistical method to represent the average weight of a particular section, allowing engineers to accurately calculate the overall weight of an entire structural steel design.
The ISMC weight chart is an essential tool for engineers who require exact weights for structural steel designs. This chart is also available online, which allows engineers to access and use the necessary information quickly and easily. With the ISMC weight chart, engineers are able to ensure accuracy in their structural designs and make informed decisions when it comes to erecting steel structures.